TiziWATER

magnetic water treatment system

TiziWATER Magnetic water treatment for calcium deposit control TiziWATER "inline" Ionisators For 3/8" - 16" pipe diameter

The TiziWATER "INLINE" Ionisators are installed directly into the water pipe. The water flows directly through narrow passages of Neodymim magnetic cushions inside the TiziWATER Ionisator. Inline Ionisators are offering always an excellent result but are vulnearable if iron particles that may be in the fresh water flow. These particles will attache inside to the magnets of the Ionisators and can close the passages after a certain time completely. In order to prevent this the installation of a particle filter of 50 - 150 mm mesh size has to be installed upfront the TiziWATER Ionisator. This filter will prevent iron particles to reach the TiziWATER Ionisator and stick to it.

Magnetic Water Treatment Technology for Home and Industrial Applications

	TiziWATER "Inline" Ionisators high performance water treatment  "inline" mounted Invasive apparatus for magneto-physical water treatment for scale protection and algae control with highest rated performance potential. Model range from 3/8" - 16" pipe diameter.
TiziWATER 3/8" - 2"

TiziWATER Ionisators Serie 1000 Type TW "INLINE" are available for the following pipe diameters   TW Ionisators of Series 1000 for low flow applications like washing machine, coolers, coffee machines where no more water flow of 29 l/minute is required   MODEL o.diamter pipe TREAD   TW1002 TW1000 TW1005     3/8 " 1/2" 3/4" male / female max. pressure: 16 bar material: stainless steel 304 magnets used: Neodymium Bi-Polar   TW1010   TW Ionisators of Serie 1000 for large flow applications in villas, houses, industries, hotels, hospitals, office buildings, cooling towers   model o.diameter thread TW1010     male/male TW1015   TW 1020   TW 1025   TW1050   Flange type TiziWATER  Ionisators TW     INLINE   3 " - 16" Advantage of TW Flange type Ionisator Full pipe capacity without pressure loss EXTERNAL FIXED NEODYMUM MAGNETS DO NOT TOUCH WATER FLOW INSIDE       Note:   material for TW Ionisators:: stainless steel AISI 304 delivered with stainless steel screws and  Neodymium magnet passages.   Note for TW model When ordering please make sure that the required max. flow capacity in litre is given by the selected TiziWATER model otherwise select a larger diameter and reduce it to pipe size. pressure drop of TW model actual pressure is reduced by the TiziWATER Ion accelerator by approx. 5 - 15 % depending on the water pressure in the pipe. Sediment Filter required for TW models The use of TiziWATER invasive ion-accelerators requires always the installation of a sediment filter of minimum 500 my mesh size which must be installed before the TiziWATER ion-accelerator.